What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
09.06.2025 01:15

This is the picture of an electronic coil of wire wound around a core of magnetic material.
2024–10–16 [ OO OLAOYE OYEBODE ]
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Can you share any "backstage pass" experiences you have had at concerts?
This is where this question deviates from being a 'generic' question, and becomes more specific.
One
An AC voltage/ current source, and an ac inductive load.
Can shaving hair by Veet in our vagina cause diseases?
[old diagram got deleted by accident]
The third is lightning and “how it gets conducted into a home.”
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Edit 2024–10.
These devices are installed between the “hot” and “neutral” and protective ground.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Can a cop pull you over walking home asking why you are out so late?
But… the neutral is now “floating” because of the 1 ohm resistance.
This one hit behind the barn.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
It also is a device that limits the change in current flow.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
First Sentence:
Report: Knicks have interest in Wolves' Chris Finch as new head coach - Sports Illustrated
what exactly is a ‘surge’ protector?
He then describes Rainy Season and Lightning.
Barnstars:
What are some things that children used to wait for, but are no longer common in today's society?
There are two important concepts here.
One is “what exactly is in a ‘surge protector’ ? ”
Here is a simplified AC power diagram.
Why is it that women are stronger than men nowadays?
the problem then depends on "how fast does the fuse operate?".
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
It seems Mohan does not understand the difference between a comment and an Answer.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
so, what happens?
What's the difference between “ce”, “ça”, and “cela”, and when do I use each (French)?
The other is “what does a “fuse” do?”
This is 'the assistant's answer'
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
What are some interests in sharing pictures of wives?
He then describes the function of a fuse.
Now when you have a certain ac resistance, then a current flows in a loop.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Because the load is inductive, the current lags the voltage.(by a bit).
What is lightning?
(Dc diagram shown, AC is similar).
At one ohm, the resistor has a maximum of 1 watt power.
A fuse is a non-resetable over current circuit protector.
So, the voltage could go up to 500 volts, and the fuse will not open up.
The MOV will conduct when the voltage exceeds 50% of line voltage.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
A circuit breaker is similar, but is resettable.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
This device then solves the entire problem.
2024–10–10[John johnson John Johnson ]
I post the exact comment here.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
a photo is worth a thousand words.
There are three different concepts here that are getting confused.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
In schematic diagrams this is the symbol for a fuse:
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
What does a fuse do?
but this device (an Inductor) … impedes the rapid changes in the current.
This is where the MOV conducts again, and dissipated the energy.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
The bolt then partially travels down the line to your home.
nine
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
But it can get overloaded, and no longer works.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Upvotes:
eight
but I think this circuit , shows a few more pieces.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
He then asserts :
These are simplified answers to the original question, and does not change anything I wrote above.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
At least they know the answer if they wanted it.
[image of Common-mode choke]
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
For this case there are devices called Metal oxide varistors (MOV).
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]